rick2995
New Member
Hi
In replacing a angle valve that services a dishwasher, I closed the main-water shut-off valve, then attempted to remove the old valve I had pressure & hot water fI waited a good 30-minutes and decided enough was enough,
The home is a tri level, kitchen/dishwasher in the lower floor level.
I turned-on all hot-water fauchets on all floors hoping to minimize the pressure on the lower-level and did get some relief
I also turned-down the temperature on the water heater.
With lots of towels, I got the job done.
Why or what is causing hot-water to continue to flow.. The cold water line was okay.
Thanks
Rick2995