(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: how to replace broken plastic part of stem

  1. #1

    Default how to replace broken plastic part of stem

    There is a piece of plastic surrounding the brass stem on faucet handle. It has a semi circular lip on top part of it which is broken. How do I replace it.?
    Thanks
    Terry

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,191
    Blog Entries
    1

    Default

    If you could attach a picture of it, that would help us.

    http://www.terrylove.com/forums/faq....chment_explain

  3. #3
    Plumber BAPlumber's Avatar
    Join Date
    Jul 2007
    Location
    Vashon, Washington
    Posts
    227

    Default

    here's what I'd do. unscrew the stem to take it out. take it down to the local HD or hardware store. find the correct replacement stem that has the plastic part. take the new stem back to the job site. install the new stem.
    Brent

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,605

    Default faucet

    Three possibilities are Delta, Vally II, and Moen. Each is distictive so you have to know the manufacurer.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •