Mike.Schwank
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
Recently found out that on the system servicing out house we have:
6inch main that has one, 1 inch branch (width of street) that then has a T to two meters and then then from each meter goes a 1" or 3/4" service to the each house. both houses are about 100-150 feet from the meter(s).
because of low pressure I put in a pump (1/2 hp) and bladder tank. My neighbor gets a pressure drop when this kicks on...
is it normal to service two 3-4 bedroon houses from one 1" pipe (black PVC)?
thanks.
6inch main that has one, 1 inch branch (width of street) that then has a T to two meters and then then from each meter goes a 1" or 3/4" service to the each house. both houses are about 100-150 feet from the meter(s).
because of low pressure I put in a pump (1/2 hp) and bladder tank. My neighbor gets a pressure drop when this kicks on...
is it normal to service two 3-4 bedroon houses from one 1" pipe (black PVC)?
thanks.