foghat35
New Member
- Messages
- 24
- Reaction score
- 0
- Points
- 0
I pulled out my ground floor toilet because of a slight leak to replace the wax ring and found a diy disaster. The pvc flange busted right where it enters the drain pipe, probably from overtightening the johnny's and was fixed with what looks like half a tube of silicone that recently failed. The floor is concrete. Is there any way to replace this without busting up concrete?? The only thing I can think of is cutting the old flange out with a dremel and putting in a male closet flange. Maybe one of those push in types. Not sure if that will work or is even code. Thanks