Wiring Boiler Controls

Users who are viewing this thread

Neeruam

New Member
Messages
1
Reaction score
0
Points
0
I am hopeing someone can assist:

I have a thermolec electric boiler TH600-M the high voltage is not a problem.

I have a 2500 sq foot home with six zones. Two sets of three zones are each tied into a Taco ZVC403 Zone Valve Controls.

I have two Manifold Circulating Pumps (Grudfos)- Each running three zones.

I have an outdoor sensor.

The actuators are 24v with end switch four wire (2 red and 2 yelloow)

I am hoping someone can assist with tieing all of these peices together.

Each zone has its own thermostat with a 18/4 wire.
 

NHmaster

Master Plumber
Messages
3,176
Reaction score
5
Points
0
Location
S. Maine

all the diagrams you need are there.
 
Last edited by a moderator:
Top