Shawn Parker
New Member
the line from holding tank (full, 1100g) and booster pump with 2 wellxtrol pressure tanks with a 30/50 switch. Noticed gage at booster reads about 45, and there is a discrepancy between the pressure tanks... the taller is 23, a bit below its normal 29, the shorter tank was reading high at 40. But no water/water pressure in the lines.
Do I let air out of the pressure tanks to below 30 then manually trip on the booster pump to pressurize the line and get the water flowing and the pressure tanks stabilized to their normal pressure?
Note- it was cold last night, but nothing drastic... low of 35. North Bay Area Calif. Doubt this has any reason for the above issue, but I just tossed that in the mix just in case.
Do I let air out of the pressure tanks to below 30 then manually trip on the booster pump to pressurize the line and get the water flowing and the pressure tanks stabilized to their normal pressure?
Note- it was cold last night, but nothing drastic... low of 35. North Bay Area Calif. Doubt this has any reason for the above issue, but I just tossed that in the mix just in case.