RanDog
New Member
I bought a new Pulte home and wanted to put in a water softener. I identified the loop, and asked where the drain line was - they said it is the 1/2 inch line in the middle. Trouble is, it terminates in a 3/4 x 3/4 x 1/2 TEE. I don't want to open it up without understanding exactly HOW this 1/2" line terminates? Obviously, there is pressure in the loop, and with the TEE, there should also be pressure in the 1/2" line!! Doesn't make sense unless there is some sort of internal plug in the 1/2" line at some point. Thank you!!