Hi,
I'm trying to setup a hydraulic water ram pump. I have about 30 ft of 2" PVC feeding into the pump. It's around 2-3 ft above the ram pump.
My issue is the ram check valve is not burping. I don't know if there is an air leak or just not enough pressure flowing into the pump.
I'm trying to setup a hydraulic water ram pump. I have about 30 ft of 2" PVC feeding into the pump. It's around 2-3 ft above the ram pump.
My issue is the ram check valve is not burping. I don't know if there is an air leak or just not enough pressure flowing into the pump.