I picked up a Toto Vespin and a 10 inch unifit this afternoon. I trial fit the unifit and i have issues with my flange. There is an offset flange installed and the flange is not level. It is about 1/2 inch off the floor in the rear and about 1/4 inch off the floor in the front. Thus the unifit will not fit flat over the flange. Will an oversize wax ring seal the gap or am i asking for trouble? If the flange has to be replaced, typically how much destruction is necessary to the tile around the flange?
Thanks,
Dave
TOTO Unifit information
Thanks,
Dave
TOTO Unifit information
Last edited by a moderator: