samlin7
New Member
- Messages
- 43
- Reaction score
- 0
- Points
- 0
Ok so this is really frustrating, my bathroom is essentially all tiled up, however i decided to keep the original floor - not looking at the toilet area at all. Now that i am ready to install the toilet it find that it rocks when i dry fit it.
On the left side it is about 1 in off the floor the right side is about 3/4" in off the floor. I used a level and the floor is level but the flange is way OFF (NOT level)
I was thinking of using a marble slab underneath but but would prefer not to.
Any suggestions, or what is the common method to fix this?
Thanks
On the left side it is about 1 in off the floor the right side is about 3/4" in off the floor. I used a level and the floor is level but the flange is way OFF (NOT level)
I was thinking of using a marble slab underneath but but would prefer not to.
Any suggestions, or what is the common method to fix this?
Thanks