Alternety
Like an engineer
I am installing a number of Totos and I have radiant tubes in the floor. Half have no documentation and the rest are too close to chance drillling.
How much stability is provided by the two floor bolts in the plastic part that sits on the floor and flange? The floors are concrete and not quite flat. The toilets wobble. Will some sort of shimming be a satisfactory solution. I will also caulk but I I suspect the caulk will not adhere to the concrete sealer.
I could possibly rough up the concrete and try epoxy of some sort where the two bolts go. I doen not seem like a real good idea.
How much stability is provided by the two floor bolts in the plastic part that sits on the floor and flange? The floors are concrete and not quite flat. The toilets wobble. Will some sort of shimming be a satisfactory solution. I will also caulk but I I suspect the caulk will not adhere to the concrete sealer.
I could possibly rough up the concrete and try epoxy of some sort where the two bolts go. I doen not seem like a real good idea.
Last edited: