AnotherTerrie
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
Just moved into a new home and am doing the usual repairs throughout. All of the toilets are Crane low-flow (not sure on the model). One is driving me crazy - when flushing, so much water enters the bowl that it swirls violently and approaches the point of overflowing, getting slightly above the bottom of the rim. I have adjusted the float cup so that the water level in the tank is correct and at or slightly below the "water line" marking. Flush action is good otherwise and no leaks are apparent anywhere. Any suggestions appreciated.