Toilet water capacity and styrofoam liners

Users who are viewing this thread

Wanye

New Member
Messages
4
Reaction score
3
Points
3
Location
Mississauga, Ontario
Hi,
I purchased a condo with an old American Standard back flow toilet that has a retrofitted styrofoam liner. The toilet takes at least two flushes after usage. Is it possible the styrofoam liner is causing the issues by reducing the water capacity?
 

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,459
Points
113
Location
Bothell, Washington
Website
terrylove.com
If your toilet is from the 80's or older, it may be either a 5.0 or a 3.5 toilet. New flappers on the racks can be for either 1.28 tanks for if you look, you can still find some for 5.0 tanks.
It's not the liner, it's the flapper. Change out the flapper for one that floats longer, which is needed for the old toilets to clear the bowl.
In the 90's the bowls were redesigned to flush with much less water. The old bowls need a lot of water to get things moving.

 
Last edited:

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
For a simple test, next time you flush, hold the handle down to keep the flapper open. If it flushes well then, a different flapper valve should help. The one Terry linked to is an adjustable one, so to save on water, you'd keep adjusting it until it reliably flushed. The better, long-term thing might be to buy a new toilet. Some of them work quite well on even a 1-gallon flush versus those that need more.
 

Wanye

New Member
Messages
4
Reaction score
3
Points
3
Location
Mississauga, Ontario
If your toilet is from the 80's or older, it may be either a 5.0 or a 3.5 toilet. New flappers on the racks can be for either 1.28 tanks for if you look, you can still find some for 5.0 tanks.
It's not the liner, it's the flapper. Change out the flapper for one that floats longer, which is needed for the old toilets to clear the bowl.
In the 90's the bowls were redesigned to flush with much less water. The old bowls need a lot of water to get things moving.

Thank you Terry!
 

Wanye

New Member
Messages
4
Reaction score
3
Points
3
Location
Mississauga, Ontario
For a simple test, next time you flush, hold the handle down to keep the flapper open. If it flushes well then, a different flapper valve should help. The one Terry linked to is an adjustable one, so to save on water, you'd keep adjusting it until it reliably flushed. The better, long-term thing might be to buy a new toilet. Some of them work quite well on even a 1-gallon flush versus those that need more.
Thank you Jadnashua!
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks