Nicholas_ii
New Member
- Messages
- 14
- Reaction score
- 0
- Points
- 0
Perhaps this should be in the shower forum, but it's tankless related question.
Now that I"m installing a tankless system, I see there is a "Supply Pressure Differential" spec of 5psi in the K-682-K manual (the 6-port thermostatic valve that works with the DTV system).
Does this spec mean that the Hot water pressure can't be more than 5psi less than the cold water temp?
If so, how could a tankless ever work with this system, given that water pressure drops with temp?
It says that "pressure regulators" can be installed, though I don't know what those are or how they work.
Any thoughts?
This is the doc I'm reading http://www.us.kohler.com/onlinecatalog/pdf/1043183_2.pdf
Thanks.
Now that I"m installing a tankless system, I see there is a "Supply Pressure Differential" spec of 5psi in the K-682-K manual (the 6-port thermostatic valve that works with the DTV system).
Does this spec mean that the Hot water pressure can't be more than 5psi less than the cold water temp?
If so, how could a tankless ever work with this system, given that water pressure drops with temp?
It says that "pressure regulators" can be installed, though I don't know what those are or how they work.
Any thoughts?
This is the doc I'm reading http://www.us.kohler.com/onlinecatalog/pdf/1043183_2.pdf
Thanks.
Last edited: