I am in the middle of a bathroom remodel and it's time to do flooring. The old vanity has been removed and the footprint is 18.5" by 42.5" and about 7mm lower than the current linoleum surface - I cut a piece of 5mm plywood and screwed it in. I still have another 2mm or so of space to buildup in order to be level with the rest of the linoleum floor. I went to Home Depot and a guy there said I could try using Henry's 345 to fill this gap. Is that a reasonable solution or is there another way?
The new vanity has legs and will be shifted over a few inches so I need to install the vinyl flooring underneath the vanity.
The new vanity has legs and will be shifted over a few inches so I need to install the vinyl flooring underneath the vanity.