Stuck Shower Strainer

Users who are viewing this thread

Karmstrong8

New Member
Messages
4
Reaction score
0
Points
1
Location
Los Angeles
Any advice on how to remove this shower strainer? Ive taken all the screws out and now it will not budget at all. Ive tried pulling it with pliers, spraying a generous amount of WD 40, and running a screwdriver along the edge but its almost like its glued in?

Any advice would be appreciated!

IMG_1146.jpeg
 

John Gayewski

In the Trades
Messages
4,366
Reaction score
1,349
Points
113
Location
Iowa
Has to be friction holding it. Maybe try a clothes hanger to hook around the grate holes and pull up hard. If it's that stuck there's a chance it could break. I'd maybe tap it with a hammer just to shock it out of place.
 

Karmstrong8

New Member
Messages
4
Reaction score
0
Points
1
Location
Los Angeles
Thank you for the reply! I did try yanking it with needle nose pliers and it didnt move so I think it might take a little bit more than a hanger :/
 

John Gayewski

In the Trades
Messages
4,366
Reaction score
1,349
Points
113
Location
Iowa
I think we are thinking different things. You could dead lift it off of there if you bend a coat hanger into a U shape (actually a C shape to start) and and get it through the grate. Might be hard to fish it through there, but once you got it there's no limit to how hard you could pull.
 

Tuttles Revenge

In the Trades
Messages
4,213
Reaction score
1,464
Points
113
get a coat hanger on near one edge.. have 1 person pulling up on it while someone else lightly taps the top with a small hammer.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks