renegade_00
New Member
- Messages
- 7
- Reaction score
- 0
- Points
- 0
Long story short, I plumbed a tub/shower faucet and supply from my basement all using 1/2" copper pipe and a brass faucet body. I used Kester 40/60 Rosin Core Solder because it seemed easier to me than using flux and the solid stuff. Anyways, now I'm having second thoughts about this and can't find any info regarding my situation. Somebody please help!
http://www.chiptech.com/secondary/manu-prod_pdf/K/Kester.pdf
http://www.chiptech.com/secondary/manu-prod_pdf/K/Kester.pdf
Last edited by a moderator: