I need help !!. I am remodeling my bath and would like to purchase a Toto Guinevere toilet. My rough opening is 12 inch but I will be installing 1/2 sheet rock and then 5/8 inch Wainscoting over the Sheetrock. This will bring my finished wall out 1 1/8.
I reviewed the specs for the Guinevere and it shows tank to wall clearance of 3/4 inch. My fear is with the additional 5/8 wainscoting I will be installing over the sheet rock, I will not allow enough clearance for the toilet. I also don't want the tank jammed up against the wainscoting.
Is there any "wiggle" room in the mounting of the flange and or the unifit unit to maybe provide me with an additional 1/2 or 3/4 inch??. If not, could you suggest another solution?
You provide a GREAT service on this forum and I very much appreciate your help and advise.
I reviewed the specs for the Guinevere and it shows tank to wall clearance of 3/4 inch. My fear is with the additional 5/8 wainscoting I will be installing over the sheet rock, I will not allow enough clearance for the toilet. I also don't want the tank jammed up against the wainscoting.
Is there any "wiggle" room in the mounting of the flange and or the unifit unit to maybe provide me with an additional 1/2 or 3/4 inch??. If not, could you suggest another solution?
You provide a GREAT service on this forum and I very much appreciate your help and advise.