Bobabuoy
New Member
- Messages
- 11
- Reaction score
- 0
- Points
- 0
I have a submersible well pump connected to my 40 gallon bladder tank that is set to 30-50psi. After using a large amount of water (a few volumes of the bladder tank), my pressure drops to zero and I dont have any water. It seems as if my pump shuts off. The contacts on the pressure switch are connected (sending power to the pump), but I am not getting any water. Is this because my pump is overheating? Do they automatically shut off? Am I draining my well dry? I don't know what kind of pump is in my well, but I do know that it is a 4" casing coming out of the ground.
Any help is appreciated, thanks.
Any help is appreciated, thanks.