WallyGater
New Member
I`m in the process of remodeling my bathroom. the toilet flange is 14 inches from the finished wall. In order to change it to 12 inch, the stack would have to be cut and a new tee would have to be installed. this new tee could be rotated to the correct position leaving a 12 inch rough. I would have to hire a plumber and spend about 500. bucks, or I could just put an offset flange on there. the floor is not tiled yet. It sounds like the offset flange is something that is only used as a last resort. It sounds like the are very problematic. What exactly is the downside to an offset flange? I think I would rather spend the 500 bucks on a special order toilet. However the offset flange, and the old toilet, would cost me next to nothing.
Last edited by a moderator: