Hi all. The other day, I went to make a pot of coffee and I didn't have hardly any pressure. I went down to my outbuilding and the pump was running constantly and the motor was hot. I checked my well (hand dug 22 ft. deep) and seen that it was low. The water level was right at a joint so I thought maybe I had a leak there so I shut off the pump and waited a few days for it to rain. The well is now up to normal but I can't get more than 20 lbs. of pressure. It's set at 30/50 so of course it won't shut off. I had a leak but I fixed that. It just runs and runs with no more than 20 lbs of pressure. Any ideas? Thanks!
Jim
Jim