dgreen1069
New Member
While moving my shower drain a few inches I accidently cut the 3" PVC pipe that was directly below it. The cut is about 1" long, the width of a reciprocating saw blade (about 1/16th") and is directly on top of the pipe. I was planning on priming the cut and applying cement to seal it up. I will also cut one of those 3" rubber connectors and place it over the cut with clamps and cement (just for good measure).
Is this a legitimate fix for what seems to be a minor problem, or do I need to cut out the cut area and add a splice (very tough since under slab)?
Is this a legitimate fix for what seems to be a minor problem, or do I need to cut out the cut area and add a splice (very tough since under slab)?