weather777
New Member
- Messages
- 36
- Reaction score
- 0
- Points
- 0
I just had a well drilled on a new homesite.Initally,the yield was 0.3 gpm and after hydro fracture 2.2gpm.The well is 1000 ft deep with static level of 300 ft.The 1.5HP 5gpm pump was set at 640ft down (Therefore,about a 500 gallon reserve) on PVC to save cost that would be involved in setting it at the bottom. There are just 2 people in the home and no yard to water. Does anyone see a problem in setting the pump at this level given the reserve? Anything I should make sure of in regards to the pressure tank, etc. when the well is fully installed in house to insure good shower pressure?
Thank you very much-
Thank you very much-