Hey guys I'm looking to replace my very very old boiler this year. I've been in the house for a few years now and its time. Looking for some advice on size and model of boiler. Looking to do it myself, I have piping experience so connections arent a problem. Just looking for some direction on what to look for as far as size and brand. Here are the facts :
Fuel - Natual Gas
Heat type - Hydronic hot water / Baseboards
Number of zones - 2
House age is 1965 (Wood frame on slab) - no basement only ground floor, second floor and attic (Ground floor on slab and new wall insulation, Second floor insulation is original to the house and usually mimics outside temps within a day)
Foot Print of house is about 2500 sq ft
Heated living space is about 1750 sq ft
- Of that 1750 sq ft about
-500 sq ft is 10' ceilings
-650 st ft is 8' ceilings
-600 sq ft is 7'3" ceilings
zip code is 11740
How many btu should I get for this house? Brand? Model? Attached Garage is unheated and gets down to like 55-60 degrees when its about 30 degrees outside. I usually leave the boiler room door open and it keeps the garage at around 55-60. Thanks guys let me know if you need more info.
Fuel - Natual Gas
Heat type - Hydronic hot water / Baseboards
Number of zones - 2
House age is 1965 (Wood frame on slab) - no basement only ground floor, second floor and attic (Ground floor on slab and new wall insulation, Second floor insulation is original to the house and usually mimics outside temps within a day)
Foot Print of house is about 2500 sq ft
Heated living space is about 1750 sq ft
- Of that 1750 sq ft about
-500 sq ft is 10' ceilings
-650 st ft is 8' ceilings
-600 sq ft is 7'3" ceilings
zip code is 11740
How many btu should I get for this house? Brand? Model? Attached Garage is unheated and gets down to like 55-60 degrees when its about 30 degrees outside. I usually leave the boiler room door open and it keeps the garage at around 55-60. Thanks guys let me know if you need more info.