Moving toilet to the side 1-2"

Users who are viewing this thread

ddehaven

New Member
Messages
1
Reaction score
0
Points
1
Location
Florida
I am installing a new toilet, and the hole is in concrete surrounded by marble -- so no chance of moving it. That said, the toilet is too close to the shower and needs to move to the side 1-2 inches.

Options? Can't do demolition to the floor....so is there a brand\model of toilet or offset flange that allows some lateral movement? (or perhaps even a smaller oblong toilet that will help with space?)

All direction appreciated!
 

Reach4

Well-Known Member
Messages
38,899
Reaction score
4,436
Points
113
Location
IL
There is at least one Caroma toilet that can offset 1 inch in any direction from an 11 inch rough. Caroma Brisbane 270 is one, and there may be more. That is a possibility. https://dynastybath.com/product/caroma-off-set-flange-connector-10-12/

Concrete and even marble can be cut to install a new flange. Some offset flanges offset by 1.5 inches. You would need a toilet where the skirt will cover where the marble has been cut.

 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks