What needs to be done in moving breakers from an inside panel to a close outside panel? I would like to move all to the outside for several reasons.Safety being the main concern. Inside is a federal pacific box.Enough said there!, and there is no room for awasher/dryer breaker in that box.However, outside approx. 8 to 10" away on the outside of an exterior block wall is a CH breaker box with plenty of breaker room in it.In terms oafety,security and codes would i have to build an access enclosure for the box,change the lock it has on it now etc.
Question 2.
I have a motion detector lighfom the box at the light runs a length of 14-2 romex directly to a breaker of its own. Is it possible to splice into that 14-2 wire at some point and junction wire a piece of 14-2 running the junction wire to another breaker box nearby,so either box can supply the motion light with power? Thanks for all replys !
Question 2.
I have a motion detector lighfom the box at the light runs a length of 14-2 romex directly to a breaker of its own. Is it possible to splice into that 14-2 wire at some point and junction wire a piece of 14-2 running the junction wire to another breaker box nearby,so either box can supply the motion light with power? Thanks for all replys !