inkycaps
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I just powered up my Mastercool Evap for the summer. The motor, pump, blower, are all in good condition and are properly set up.
However, the air flow seems to be restricted. I removed the duct plate, so there should be flow.
It works fine if I leave a panel off of the unit. When I put it on, the air gets restricted. This hasnt happened before.
Am I forgetting something?
thanks for the help
However, the air flow seems to be restricted. I removed the duct plate, so there should be flow.
It works fine if I leave a panel off of the unit. When I put it on, the air gets restricted. This hasnt happened before.
Am I forgetting something?
thanks for the help