I recently installed a 1.5 cf katalox system with a Fleck 5600sxt set up for air regen. It seems to be working fine, but I'm a little concerned about all the tiny air bubbles blocking light through the UV sterilizer. If I wanted to switch to H2O2 regen, is it as simple as removing the air screen and running a line to an H2O2 tank? I assume brine draw time would need adjusted, but any other modifications needed? Thanks
Users who are viewing this thread
I can't help with the conversion. This thread may be of interest: https://terrylove.com/forums/index.php?threads/remove-air-from-system-after-air-injection-iron-filter.74384/
Sponsor
Paid Advertisement
ditttohead
Water systems designer, R&D
You are basically correct, change the draw from the screen to a 3/8" tube. A h2o2 regen design has shown to be effective. Adjust the draw time to draw in 2 gallons of a diluted h2o2 solution. I would need to know the injector size to determine the draw time but in general 3-7 minutes is all that is needed. Many of our customer use a 5 or 10;1 ratio of clean water to h202.
Hope this helps.
Hope this helps.
