Pghsebring
DIY Member
Now, i've seen all the rants, i want to point out this piping was here when i moved in.
What i have is a 7 ft run horizontal of 1/2" pipe across my side wall, then a 6ft drop in the corner, then another 6 ft horizontal (perpendicular to the first horizontal run) across my back wall. Think of it as a 3 dimensional "Z". And not one clamp or hanger on any of it. It feeds the dryer.
I found J hooks for the top horizontal part, but the other two runs (vertical near a corner, and horizontal near a wall) are offset from the walls about 1-2", so i can't just use normal clamps and clamp them to the wall. How would you fasten these in place? All the walls are CMU.
Thanks in advance.
What i have is a 7 ft run horizontal of 1/2" pipe across my side wall, then a 6ft drop in the corner, then another 6 ft horizontal (perpendicular to the first horizontal run) across my back wall. Think of it as a 3 dimensional "Z". And not one clamp or hanger on any of it. It feeds the dryer.
I found J hooks for the top horizontal part, but the other two runs (vertical near a corner, and horizontal near a wall) are offset from the walls about 1-2", so i can't just use normal clamps and clamp them to the wall. How would you fasten these in place? All the walls are CMU.
Thanks in advance.