marshal
New Member
hoping for any advice on potential gotchas in my finishing punch list.
I remodeled this whole bathroom over the past 14 months with only subbing out the rough plumbing and electrical.
feels so good to be this close to the finish line. i would've gladly paid my plumbing sub to do this, but he only does rough for new construction and remodels with zero interest in the finishing.
here's the punch list:
1. Toto aquia IV with washlet
-flange has been dialed in with the oatey kit to bring it 1/4" above finished floor
-wax or waxless ring for the unifit? ditra heat in the floor with porcelain tile seems like wax should be fine and in floor heat is not really a concern
-i'm privy to the structural caulk advice and am going with the polyseamseal tub and tile. will shim as well.
2. hansgrohe his and hers showers with rain head and handshowers. ibox valve
-dutifully follow the Hansgrohe instructions?
-tape only? I get to 4 full turns with tape only currently on the rainhead arms
3. jaclo supply with stop for the toilet
-seems like a simple sweat fit?
I remodeled this whole bathroom over the past 14 months with only subbing out the rough plumbing and electrical.
feels so good to be this close to the finish line. i would've gladly paid my plumbing sub to do this, but he only does rough for new construction and remodels with zero interest in the finishing.
here's the punch list:
1. Toto aquia IV with washlet
-flange has been dialed in with the oatey kit to bring it 1/4" above finished floor
-
-i'm privy to the structural caulk advice and am going with the polyseamseal tub and tile. will shim as well.
2. hansgrohe his and hers showers with rain head and handshowers. ibox valve
-dutifully follow the Hansgrohe instructions?
-tape only? I get to 4 full turns with tape only currently on the rainhead arms
3. jaclo supply with stop for the toilet
-seems like a simple sweat fit?
Last edited: