i have a right angle tapered thread brass fitting that must be at 12 oclock
hand tight it stops at 1 o clock and wrenching only goes a hair more so it has to be backed out to 12 o clock
this makes for a leak and also it rubs against another part
any ideas? this must be a common problem with threaded fittings that need to be in a precise position
i cant see try to tighten from 1 o clock all the way around to 12 o clock almost 1 full turn, i think it will go to 2 or 3 o clock max
thanks for your help
hand tight it stops at 1 o clock and wrenching only goes a hair more so it has to be backed out to 12 o clock
this makes for a leak and also it rubs against another part
any ideas? this must be a common problem with threaded fittings that need to be in a precise position
i cant see try to tighten from 1 o clock all the way around to 12 o clock almost 1 full turn, i think it will go to 2 or 3 o clock max
thanks for your help