Grohtherm 2000 NEW

[MIKE007]

I have to install a Grohtherm 2000 bathtub faucet. Is a new installation. At what height from bathtub should be installed? Than you.
Here you have a picture of the product:

 

[Terry]

I tend to put tub spouts at the break on the tile.
That had been 4-1/4 to 6"
I have also seen them as high as 8"

You need at least 1" air gap between outlet of spout and the flood level of the tub.
And sometimes you need to fit an allen wrench from below.

 

[Sponsor]

 

[MIKE007]

Thank You

Another question:
The faucet is coming with a S-shape union. Do I need that? Is a reducer from 1/2 to 3/4. I prefer to use a 3/4 pipe directly from the wall to faucet.

 

[Terry]

The little wiggle in the fitting is in case you're not spot on with your wall location.