Chefwong
Member
The main run is CI leading up to a 2" female coupler coming out of the floor.
Have not decided whether I'll be using brass drain *I have a stash of cast brass traps, tubes, etc* or just do PVC all the way the sink. The coupler is about 3-4 inches below the floor ...so if I decide to go the brass route, I do need to stub it out regardless.
Would galv. be the best material for this application ?
Have not decided whether I'll be using brass drain *I have a stash of cast brass traps, tubes, etc* or just do PVC all the way the sink. The coupler is about 3-4 inches below the floor ...so if I decide to go the brass route, I do need to stub it out regardless.
Would galv. be the best material for this application ?