TruckkerJoe
Member
Hello to all,
I'am trying to understand why there are so many softener heads for different types of exchange resins.I have a flex5600econimizer. that we are using with Ionac c-249 for a soluble manganese 0.236mg/l which isn't working,so I was thinking on using Filox or Pyrolox or Greensand? but from what we are reading,they have all have diff.set-ups(heads) Filox-r calls for a flex-2700 for a 10in x 54' tank and so-on!!But a also have a bran new flex-7000 not the s.l.x. model,(just filter head).
Can I use either one?Anyways we need to save water(slow-well).What is best approach?
How about Greensand with potassium permanganate will this use the least amount of water?
My set-up now<well=softener=cistern=bladder=house. so softener regenerates oxidized cistern-water(not-soluble) if you can understand?kind of wanting it this way? Thanks to all who reply
I'am trying to understand why there are so many softener heads for different types of exchange resins.I have a flex5600econimizer. that we are using with Ionac c-249 for a soluble manganese 0.236mg/l which isn't working,so I was thinking on using Filox or Pyrolox or Greensand? but from what we are reading,they have all have diff.set-ups(heads) Filox-r calls for a flex-2700 for a 10in x 54' tank and so-on!!But a also have a bran new flex-7000 not the s.l.x. model,(just filter head).
Can I use either one?Anyways we need to save water(slow-well).What is best approach?
How about Greensand with potassium permanganate will this use the least amount of water?
My set-up now<well=softener=cistern=bladder=house. so softener regenerates oxidized cistern-water(not-soluble) if you can understand?kind of wanting it this way? Thanks to all who reply