Hi All,
Had my rough inspection today and 2 things inspector wanted me to change. Perhaps the answer is I just need to change and please the inspector regardless whether my design is OK, but curious for feedback.
1) Toilet from floor above into horizontal branch. Upstream of picture are at the end a shower (vented shortly downstream), tub (wet vented to shower vent), and closest to toilet, a dual-vanity (AAV vent up from three way tee-wye). Per the red mark-up in my attached photo, inspector said he wants the toilet to come down to 90 and then into a horizontal wye, vs slightly angled like I have it now.
2) I used three way-tee-wye whatever it's called (not sani-tee) to combine 2" washing machine and laundry sink drains before going into 3" 45 wye of horizontal branch. Attached diagram is how I have it now. Inspector said washing machine needs to go directly into 3" branch instead.
Look forward to any feedback on whether what I did is acceptable or not....and secondarily do I just bite bullet and fix it how inspector wants or fight it somehow)
Regards,
Roger
Had my rough inspection today and 2 things inspector wanted me to change. Perhaps the answer is I just need to change and please the inspector regardless whether my design is OK, but curious for feedback.
1) Toilet from floor above into horizontal branch. Upstream of picture are at the end a shower (vented shortly downstream), tub (wet vented to shower vent), and closest to toilet, a dual-vanity (AAV vent up from three way tee-wye). Per the red mark-up in my attached photo, inspector said he wants the toilet to come down to 90 and then into a horizontal wye, vs slightly angled like I have it now.
2) I used three way-tee-wye whatever it's called (not sani-tee) to combine 2" washing machine and laundry sink drains before going into 3" 45 wye of horizontal branch. Attached diagram is how I have it now. Inspector said washing machine needs to go directly into 3" branch instead.
Look forward to any feedback on whether what I did is acceptable or not....and secondarily do I just bite bullet and fix it how inspector wants or fight it somehow)
Regards,
Roger
Last edited by a moderator: