Hola
I'm looking to install a barely used Geo Heat Pump in my home and I'm trying to decide on a new pump h.p.
The existing well has served it's intended purpose flawlessly for 18 years with a 5GS07 (I had to figure that out -- goulds box drawing 7.5 amps on two legs at around 5 GPM).
I've read several threads here about this type of application, but could find no answer to the following question...
If I know my pump model, and measure my exact GPM, could I determine (with manufacturers performance graph) the working head pressure of the system accurately?
I understand my results would only be for that moment and would vary with static level.
I will be taping directly into pump line (removing pvc from flexible line) to eliminate any interior piping resistance.
Thanx in Advance
TinHead
I'm looking to install a barely used Geo Heat Pump in my home and I'm trying to decide on a new pump h.p.
The existing well has served it's intended purpose flawlessly for 18 years with a 5GS07 (I had to figure that out -- goulds box drawing 7.5 amps on two legs at around 5 GPM).
I've read several threads here about this type of application, but could find no answer to the following question...
If I know my pump model, and measure my exact GPM, could I determine (with manufacturers performance graph) the working head pressure of the system accurately?
I understand my results would only be for that moment and would vary with static level.
I will be taping directly into pump line (removing pvc from flexible line) to eliminate any interior piping resistance.
Thanx in Advance
TinHead