dripdripdrip
New Member
Costco Waterridge dual flush
So I decided to pull it up one more time and sure enough there were no leaks around the flange/wax seal so I just cleaned up the wax pieces and re-installed the new one. Still some dripping sounds but now they're different than before (quieter and not the steady streaming sound but it goes on for longer than before) so looks like everything's A-OK, although the toilet's flush leaves a lot to be desired (it seems that the default settings are too weak, so I adjusted the flusher to give a more forceful flush however the water doesn't seem to be directed properly so I readjusted the amount of water in the tank by adding a filled handsoap bottle of water to displace the amount of water). This seems to correct things somewhat by having less water forced out.
So I decided to pull it up one more time and sure enough there were no leaks around the flange/wax seal so I just cleaned up the wax pieces and re-installed the new one. Still some dripping sounds but now they're different than before (quieter and not the steady streaming sound but it goes on for longer than before) so looks like everything's A-OK, although the toilet's flush leaves a lot to be desired (it seems that the default settings are too weak, so I adjusted the flusher to give a more forceful flush however the water doesn't seem to be directed properly so I readjusted the amount of water in the tank by adding a filled handsoap bottle of water to displace the amount of water). This seems to correct things somewhat by having less water forced out.
Last edited: