Clack WS1 Circuit Boards

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
Kevin Murphy

Kevin Murphy

New Member
Messages
3
Reaction score
0
Points
1
Location
Florida
I have 2 Clack valves, one for a Iron/Sulfur Filter, and one for a Softner. Both have 15V power supplies but I noticed a 12V marking on the 4 button Sulfur board. The softner board is 5 buttons but voltage is not labeled at the power connector. How do I know what voltage this should board should be, and is there a problem using 15V on a 12V Clack board?
 
You must log in or register to reply here.

Similar threads

T
Fleck 7000 SXT Repair or replace with?
Replies
16
Views
767
Bannerman
Bannerman
Jag_Man653
Replacement of a circa 2007 Clack
Replies
12
Views
868
Caldezrat
Caldezrat
TacoBret
Clack WS1 Iron Sulfur Filter losing air pocket
Replies
1
Views
579
Rotaris
Rotaris
W
UD error code Fleck 9100sxt
Replies
0
Views
692
Wakeen40
W
B
Help Needed - Clack WS-1 Brine Tank Full of Water, Messed Up Settings, and Other Issues
Replies
0
Views
477
brawbridge
B
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks