So our bathroom had mold behind the toilet, so I dove right in and removed the toilet and replaced the drywall. I'm starting to think about the hard part... getting the toilet back in. Of course nothing is ever as simple as it should be and I'm starting to get over my head. The offset cast iron flange has one broken side (as you can see in the picture), another flange that is suppose to be screwed into the floor (but wasn't) was on top of that when I pulled the toilet out, this was cracked too. The middle of the drain is at 10 1/2"... so I'm not exactly sure how everything is going to be centered. Please, plumbing Gods, tell me what I need to do!
Last edited by a moderator: