Blaze
New Member
I am putting in a shower in our second story bathroom and am wondering if this is a sufficient method of draining and venting.
Shower drain to 2" p-trap, then out to 3" horizontal waste line (distance from p-trap to waste line is 4-5 inches). The connector at the 3" waste line is a sani T connector (does it need to be a wye connector?). The flow of waste will be to the right down the 3" horizontal waste line. There is a 2" vent stack about 12 inches to the left of where the shower meets the waste line that is also used to vent the toilet. Do I require an additional vent or will that one work?
Thanks in advance for your help!
Mark
Shower drain to 2" p-trap, then out to 3" horizontal waste line (distance from p-trap to waste line is 4-5 inches). The connector at the 3" waste line is a sani T connector (does it need to be a wye connector?). The flow of waste will be to the right down the 3" horizontal waste line. There is a 2" vent stack about 12 inches to the left of where the shower meets the waste line that is also used to vent the toilet. Do I require an additional vent or will that one work?
Thanks in advance for your help!
Mark