This particular water well is in Bastrop County, close to Austin where volcanic iron and iron sulfide are prevalent. This is also where the huge forest fire occurred a couple of years ago. Lots of water wells there have these huge levels of iron but we are able now to salvage them. What gets me is that the well driller charged $14,500 for a 400 foot well, signed off on the well report as "good quality water" and then offered no assistance whatsoever. That's just bad business in my book. I manufacture the peroxide injection systems and I never got paid either but at least we got the water to an acceptable level of quality. The homeowner is so impressed that he is now marketing complete iron removal systems in his area combining H2O2 with different levels of filtration with five or six success stories under his belt. There is no book with instructions, so this has been quite the experience but the really important thing we learned is that if the iron content is over 10 ppm and the pH is acidic, then the pH must be brought up to over 7 to avoid extreme solids buildup in the lines along with exothermic reactions. Hydrogen peroxide favors an alkaline environment to work efficiently.
I would also like to add that the homeowner is not who offered to purchase our hydrogen peroxide oxidation system. It was the water well driller and the pump company he purchases from, both of which were in panic mode and neither of whom are willing to pay the small amount it took to oxidize this iron out. So, this has been a learning experience on several different levels.