rvcolt
New Member
I am installing a 2500 gal backup storage tank to my well. Would it be a good idea to plumb and wire it so that I can run either one of three options.
1. The well to house. In case of problem with the tank.
2. The well through the tank to house.
3. The tank alone to house. In case of well problems.
Also which pump should I use? I think I need to use a float valve in the tank along with a timer because my well only produces about 4 gpm and I don't want to pull the water level down too much. I have had one cave in already but was able to pull the pump up and take out a 30ft section of pipe.
I would appreciate any advice.
Jerry
1. The well to house. In case of problem with the tank.
2. The well through the tank to house.
3. The tank alone to house. In case of well problems.
Also which pump should I use? I think I need to use a float valve in the tank along with a timer because my well only produces about 4 gpm and I don't want to pull the water level down too much. I have had one cave in already but was able to pull the pump up and take out a 30ft section of pipe.
I would appreciate any advice.
Jerry