flow valve

  1. AndrewKR

    Troubleshooting the soda ash pump not shutting off

    The soda ash pump was continuously running after the water was shut off. I found the flow switch control that activated the soda ash pump and learned to push the plunger down to manually turn the pump off when no water was flowing. The pump would correctly start when water flowed but would not...
  2. saritansamay

    ACCOR flowtite valves

    Hello, I know the reputation these valves have and they should be replaced. I wanted to know if they are closed can the pressure cause these to leak where you pull the valve? It is a very slow drip. Here is a little back story. Last week my bathroom developed a smell. The only way I can...
  3. Diana Guthrie

    How to get putty off fill valve

    I'm trying to change out the flow valve on my toilet and I know how to do it. However, when the plumber installed it, he use putty on the inside around the tube. I can't get it to move at all. How do you get that stuff off,without calling the plumber who did it in the first place? is there some...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks