Search results

I bought a pump that has a different type of switch than my old one. My original pump had a switch attached to the pump. The switch actuator went up and down detecting water level. The new pump came with a floating switch. I don't have the room to operate the mercury floating switch properly. I...

After I flush the toilet, the water level drains leaving very little water in the bowl. When I use the toilet, I constantly have to clean the toilet walls because the waste lands on the walls instead of water. It seems like this problem started when replacing the round ring under the toilet a...

After I flush the toilet, the water level drains leaving very little water in the bowl. When I use the toilet, I constantly have to clean the toilet walls because the waste lands on the walls instead of water. It seems like this problem started when replacing the round ring under the toilet a...

I'm installing a new sewage pump and I noticed a round venting hole in the old pipe at the connection to the pump. Does the pump exit pipe need venting? The unit that the pump sits in has a 4" vent already. Should the hole in the exit pipe be above or below the water level? It seems that the...

Since my toilet is lower than my waste exit, I have a pump that ejects the waste up and out of the house. The pump is not working. I removed the pump out of the housing (pain in the @ss). When I turn the power on, the pump makes a humming noise but does not come on. When I manually rotate it, it...