Search results

Hi guys, I don't have Gas Shut Off Valve easily to Turn Off Gas in case Gas Leak in Emergency situation, so I want to modify the black Iron Gas Pipe behind the Range in this way, so that Shut Off Valve install behind the Stove 4 or 5 foot above and every one in Home easily Shut Off in Emergency...

I have another problem in my Home around the Windows on mirrors lot of Moistorization Water occupying, so all water leak on the Base, and I clean every day 10 time per Window, and around the Windows Fungus growing, so I clean ever day water. So what cause this Windows releasing water problem in...

And I am attaching few Photos. Other photos says file is too big, so I can't attach.

Hi, yes there is a Washroom on this Top Floor and the Exhaust Fan directly Vent out through Vent Pipe to Roof it is connected, so the Air get out from the Roof.

No I don't have any FAN inside the Attic.

Hi guys, I am having problem in Attic, 1)--I mean Inside Attic having lot of Moisturization Water on Top of Insulation in Winter time, when I move Insulation all Dry in bottom, only Top of insulation this Moisturization Water is there. Is there any body know from there this water is growing...

Specially I am using this BOSCH Machine for Heating also. So I use for Hot Water & Heating in Home. Builder install this Mixing Valve on BOSCH Machine all over this neighbor hood, that means all BOSCH machines having this Mixing valve in this area. Here is the Photo shows on Valve with ARROW...

i there, My Tankless Water Heater set temperature is 120*F, so when I adjust Mixing Valve by opening Tap, can I just adjust Mixing Valve until I get hot water in Tap. Because while adjusting Mixing Valve I rotate Knob ANTI-CLOCK wise all the circles rotates, now only one circle rotation is...

Hi there, I am facing higher water bill, so i want to know, can if adjust SHUT OFF VALVE in QUARTER BELOW POSITION under Kitchen Sink & Washroom Sink to flow water lower down, so that I can get little less Water Bill. If I adjust water flow under sink shut off valve, is there any problem after...

Once I install this Mixing Valve. --Is this Mixing Valve by default set to 50% Cold water & 50% Hot water or do I have to do some adjustment according to my requirement like I need 40% Cold water & 60% Hot water releasing from Mixing Valve to maintain all Sink & Bathtub having Hot water. --I...

Hi there, thanks for your reply. Is it ok to use my Mixing Valve says ZURN WILKINS ZW1017XL, but the new Mixing Valve says ZURN WILKINS 34-ZW1017XLC . So is it ok to install on my BOSCH Tank less Water Heater. Please let me know.......Thanks

Hi guys, I have 3/4" PEX and my Mixing Valve says ZURN WILKINS ZW1017XL, but can I install ZURN WILKINS 34-ZW1017XLC on my BOSCH Tank less Water Heater. And I am attaching Photos on my System & I am attaching Photos of a Mixing Valve which I am planing to buy, please have a look in Photos. The...