Search results

Jeff thanks; i will replace it ; do you have a product link or a name i can find a better adapter or option to go with ?

I know it is a valve to the main water supply of the house ; I just didn't understand why it was necessary to add another possible leak point when there is a shut off at the meter

Also have no clue what the black pipe is coming in

Hey thanks for the response; what do you recommend changing it to??

Any help is appreciated; while working under my house I found that my water in was dripping at the white coupling so I decided to tighten it ....which that fixed the leak. My Question is; what is the valve shown with the red arrow ? is it necessary ? The yellow arrow is pointing at what I...

Awesome thanks for that makes me feel so much better ! all is well; bought a wireless WIFI leak detector and put it in the pan as well

Awesome yes there is a plastic stiffener. My concern was before i replaced the hoses they were pipe threaded connections making the seal but now they are a gasket mating to the nipple face with threads holding it down. Link to the exact product is below. Just not sure if a gasket connection is...

thanks for the help with this and for the fast reply; would you be worried about the fact that i went to a compression fitting ? There was a pipe thread fitting there before...

Recently re-did the plumbing on my hot water heater because it was done with pex all the way to the nipple and that is a code violation. In doing this changeout I could not get the new compression type fittings to make a good seal with the plastic heat trap inside the pipes. They were causing a...

All done finally; the copper stub outs did not work because of channel iron under the hole. Had to adjust the Drain 5 times before it stopped leaking. Thanks all.

The Licensed plumber that did the plumbing in this new construction went out of business and does not have a phone to call that I can find.

Hmm my PEX running to the floor is 3/4 and i found a 3/4 stub out and a 3/4 to 1/2 sweat MIP

It actually happened in the middle of the night when we were asleep.

Thank you for the advice that i am also taking into action. I am going with a 3/4 copper stub out with the mounting bracket to mount from under the house then using a sweat on 1/2 MIP fitting for the braided line to connect to...

QUICK Question friends..... Anybody objecting to putting a garden hose sillcock flush mounted to the floor on a pier and beam house and converting the threads from GHT To MIP then to the bath tub faucet ? Or are these threads notorious for leaks ??

UPDATE to those who care: I Live in Texas Not France...I Will be deleting the decorative tube with the terrible gasket mechanism and going back with a Braided Flex hose that I found that has the correct connections on each end. It is not worth the risk with this terrible design. If a kid were to...

I am unsure of the dimensions you are requesting but here is the link to the exact compression fittings i have coming to the tub 3/4. Water Creation 1/2 in. or 3/4 in. Single Offset Supply for Claw Foot Tubs, Triple Plated Chrome-SL-0002-01 - The Home Depot

Thank you for the reply; my other concern was that the fitting on the PEX side is NPT which i believe is the wrong threads for the compression fitting...Ill attach a photo here. I will add a shut off; I agree

I am going to fix this plumbing; my new floors are in and i am ready to put the bath tub in. Can i go and find a 3/4 sharkbite to compression threads fitting and be done ?? Copper stubout is attached.

Reading another forum on this page I found a similar situation but I am not sure....Link is below. The copper stubout would then just be cut and put the compression fitting on I guess ? Claw foot tub supply lines | Terry Love Plumbing Advice & Remodel DIY & Professional Forum