Well.... After replacing the gas valve it ran like a clock for 6 days and at noon on the 7th I looked at the camera and it was slightly above the set point of 170 so I watched it hoping it would shut off bot when it reached 220 and still running I shut it down.
Now after researching the Honeywell S90B Intermittent pilot which is no longer available nor any tech info I found a troubleshooting guide from another like unit that states "Check for proper thermostat (controller) operation. Remove MV lead at module; if valve closes, recheck temperature controller and wiring; if not, replace gas control." I will update as I dig in deeper.