Recent content by Brihen

Thanks, that's got to be the one! Faucet and sprayer.

Looking at new faucets, it seems to me that these side sprayers are becoming a thing of the past as they all seem to be going to the pull-out sprayers

Terry here is a pic.

Thanks. We have the same last name, wonder if we are related.

Trying to replace sprayer (black hose). Not sure what make of faucet. Anyone know what type of fitting this is and how to remove and replace? Also, what about just cutting the hose and splicing on a new sprayer that way?

The floor will be a little higher. I think maybe 1/4" I hope a thick or double wax ring will do it. I want to cover the 1.5" t+g with 5/8 pw 1/4 cbu and 1/4 tile. It had 3/4" particle board and vinyl sheeting, over the t+g.

The flange seems to clean up pretty well I think. Most of the rust is inside the pipe, but it is a thick pipe.

OK. I will do that and take some more pics. What would I look for to tell if it is no good?

more pics

Looking at the toilet flange I see what seems to be fairly superficial flakey rust in places, mostly inside the pipe and along the outside edge of the 1/4" flange itself. I do not see any cracks or leaks. Also the two bolts look like they could be reused, but there is some rust where they go...

Thanks for the replies everyone. What do you think would be the best way to deal with this drain? Cut it or attempt to unscrew it? I am thinking cut the galv pipe about 1/2 down and add a rubber coupling?

Thanks. I think I will use foam, because I am thinking of getting the whole 48x48" shower kit, even though I will have to cut it down to size.

Thanks. yes I planned on top quality 5/8 pw with quickset base and the Kerdi pre formed foam. I have looked at john bridges web site and will probably get his book on Kerdi. So far I have not found any plumbers out here in Portland OR. Who know about the drains, so I might have to tackle that...

Do you think Kerdi or a mud pan would work best here? I would probably be ok with someone (good) putting in a pan, but they usually want to do the whole job?