Guy48065
Member
I have a rust pinhole in the cast iron sanitary wye that makes the final turn before exiting to my septic tank. I'd like to replace with PVC but I'm concerned I won't be able to fit it in without major surgery. All the piping in this area is fixed in place by a built-in cabinet.
The existing wye is a 4x4x3 no-hub and it's only 6" from the top of the 4" to the open end of the 3". The equivalent PVC fitting--with hubs--is much taller.
What's my approach here?
The existing wye is a 4x4x3 no-hub and it's only 6" from the top of the 4" to the open end of the 3". The equivalent PVC fitting--with hubs--is much taller.
What's my approach here?