Hugobroten
New Member
I have a hydronic system floor heat my manifolds are fifty feet from the boilers I have a taco 007 pump with a head of 8.5 on the system now. There was a taco 0010 pump with a head of 10.5 the farthest manifold has
approximately, 20 ft of 3/4 copper
100 ft of 1 inch plastic, 25 ft of one inch copper, with fittings, 250 ft of PEX. I have about 4.5 gal now according to all the manifold flow meters thinking 7.5 ft of head I want to raise it to 6 gpm which would raise the head to 9.7 . My question is would a Grundfos ups 15 cut the mustard it’s a 18 ft head pump with total flow of 17.
approximately, 20 ft of 3/4 copper
100 ft of 1 inch plastic, 25 ft of one inch copper, with fittings, 250 ft of PEX. I have about 4.5 gal now according to all the manifold flow meters thinking 7.5 ft of head I want to raise it to 6 gpm which would raise the head to 9.7 . My question is would a Grundfos ups 15 cut the mustard it’s a 18 ft head pump with total flow of 17.